Tændingsboks MSD Programmerbar Digital 7 Plus

9.999,00 DKK

Lager: Ikke på lager, leveringstid 4-7 dage Ikke på lager, leveringstid 4-7 dage

Antal

MSD Programmerbar Digital 7 Plus tændingsboks, er en tændingsboks mest prima bruges til race. Boksen skal programmeres via PC eller MSD håndholdt programmer.

Man kan lave sin egen tændingskurve, som gør den ideel til NOS / lattergas og trykladet biler. Ydermere kan man lave individuelle tændingskurver for hver enkelt gear, samt have forskellig tændingstidspunkt på hver enkelt cylinder. Der er adskillige omdrejningsbegrænsninger, mulighed for retard styring af flere enheder og en masse andet. Se mere info længere nede.

Boksen kan anvendes til 4-6-8 cylinder motorer. Boksen giver 535v og op til 190mJ ved hver gnist.

Mere information

If you're a consummate engine tuner and know how to take advantage of minute changes in timing during a quarter mile pass, then the Programmable Digital-7 Plus is the ignition for you! All of the standard programmable features such as Individual Cylinder Management, Step Retards, Rev Limits, Shift Points and more are included in the Plus version but you also get more. Much, much more. A MAP sensor is required for the boost circuit. The Ignition is supplied with wiring harnesses, mounting hardware, an RS232 computer harness and the Pro-Data+ software on a mini CD. The Programmable-7 Series of ignition controls has been updated with the Power Grid Ignition System

Features:

Map a complete timing curve for every gear.
Output to activate a device through rpm, time or pressure inputs.
Automatic magnetic pickup compensation for crank triggers or distributor pick- ups.
Program your engine's firing order for ease of setting the cylinder-to-cylinder timing.
There is a cam sync output for fuel controllers or data acquisition.
Vacuum advance and boost retard is selectable through a MAP sensor.
Program an rpm limit that is ramped in during the launch.
Select the rpm limiter value in rpm/seconds.
Acquire 20 seconds of run data including two seconds prior to launch.
View all ignition events in a new Launch History window including the retard sum, manifold pressure, rpm, shift points and more.
Updated X-Y plots with interpolation for smooth changes.
Stage retards can be set to ramp the timing.
An upgraded micro- controller runs at 40MHz enabling timing accuracy within 0.1 degrees and +/-1 rpm at up to 10,000 rpm!

Ignition Box Output:Capacitive discharge
Circuitry:Digital
Rev Limiter:Yes
Timing Retard:Three-stage
Data Acquisition:No
CD Voltage Output to Coil:535 V
Current Draw:1.1 amps per 1,000 rpm
Spark Output (millijoules):190 Millijoules
Minimum Operating Voltage:12 V
Maximum Operating Voltage:18 V
Length (in):9.500 in.
Height (in):2.250 in.
Width (in):4.500 in.
Ignition Box Color:Gold
Coil Included:No