AFR Aluminium Topstykke, 195cc, Small Block Chevrolet, 64cc champer

6.895,00 DKK

Lager: Leveringstid er 7-14 dag(e) Ikke på lager, leveringstid 4-7 dage

Antal

AFR Aluminium Topstykke, 195cc, til Small Block Chevrolet.

Kommer komplet som på billedet med ventiler, studs, guide plates, fjeder osv. Kommer med fjeder til hydralisk rulleknast.

Dette topstykke kan bestilles med andre fjeder. ( Ring til os for info )

Dette topstykke har en indsugningsport på 195cc, som gør det ideel til din high performance motor.

Passer til Chevrolet 305cui, 307cui, 327cui, 350cui & 400cui.

Prisen er pr. stk.

Mere information

AFR's 195cc SBC Enforcer Cylinder heads feature our Permanent Mold “As-Cast” Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. This budget friendly head is perfect for your 350 to 400 Cubic Inch operating below 6000 RPM.

They come fully assembled with the identical components found in our higher end CNC ported cylinder heads; such as ARP rockers studs, PAC Racing springs, viton valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring cups our one piece 8mm 21 4N Stainless Steel valves. They are available in straight or angle plug and bare without any parts for the DIY. Sold as a single piece, 2 are required per engine.

Combustion Chamber Volume (cc):64

Intake Runner Volume (cc):195cc

Exhaust Runner Volume (cc):76cc

Cylinder Head Style:Assembled

Cylinder Head Material:Aluminum

Intake Port Shape:Rectangular

Intake Valve Diameter (in):2.020 in.

Cylinder Head Finish:Natural

CNC-Machined Combustion Chamber:No

CNC-Machined Intake Runner:No

CNC-Machined Exhaust Runner:No

Combustion Chamber Style:Heart

Intake Port Location:Standard

Exhaust Port Shape:Square

Exhaust Port Location:Standard

Spark Plug Style:Angle

Intake Valves Included:Yes

Exhaust Valves Included:Yes

Exhaust Valve Diameter (in.):1.600 in.

Valve Springs Included:Yes

Maximum Valve Lift (in):0.600 in.

Outside Diameter of Outer Spring (in):1.290 in.

Damper Spring Included:Yes

Number of Springs Per Valve:Dual

Retainers Included:Yes

Retainer Material:Chromoly steel

Locks Included:Yes

Lock Style:7 degree

Valve Stem Seals Included:Yes

Rocker Arm Studs Included:Yes

Rocker Arm Nut Thread Size:3/8-24 in.

Rocker Arms Included:No

Rocker Arm Nuts Included:No

Guideplates Included:Yes

Guideplate Pushrod Size:5/16 in.

Valve Cover Mounting Style:Perimeter bolt

Accessory Bolt Holes Drilled:Yes

Intake Valve Angle:23

Exhaust Valve Angle:23

Valve Guides Included:Yes

Valve Seats Machined:Yes

Valve Seat Machine Style:3-angle

Valve Seat Material:Ductile iron

Steam Holes Drilled:No

Oiling Style:Through pushrod

Machined for O-Ring:No

Heat Crossover:No

Quantity:Sold individually.