Edelbrock Performer Indsug, Cadillac 472 - 500cui
5.195,00 DKK
Lager:
Ikke på lager, leveringstid 4-7 dage
Ikke på lager, leveringstid 4-7 dage
Edelbrock Performer Alu indsugningsmanifold, som passer på Cadillac 472 & 500cui fra 1968 - 1976, uden EGR.
Manifolden er et dual plane manifold, som har et arbejdsområde fra 0 - 5500omdr, hvilket gør det perfekt til gadebrug.
- Recommended intake gasket: Fel-Pro # MS96028
- When using Quadrajet, # 2115 accepts divorced or electric choke only.
- Manifold height: A-4.88", B-5.81"
- Carb pad height: 5.34"
- Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 Series or Performer Series 750-800cfm
- Port exit dimensions: 1.25" x 2.00"
- The carb pad is 3" taller than stock, and will not fit many stock applications.
- Due to the design and leg configuration of the Edelbrock manifold, the stock air conditioning compressor and bracket will not fit. The mounting bosses are cast into the manifold only to facilitate fabrication of bracketry, if desired.
- Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
- Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
| Center Maximum Height | 5.340 in |
|---|---|
| CNC Ported | No |
| Finish | Satin |
| Front Maximum Height | 4.880 in |
| Material | Aluminum |
| Rear Maximum Height | 5.810 in |
| Single Or Dual Plane Type | Dual Plane |
Der er endnu ikke nogen anmeldelser her. Vi vil være glade for hvis du vil anmelde som den første.
Forslag til dig
Andre købte også
