Fitech Brændstof beholder Med Indbygget Benzinpumpe

5.495,00 DKK

Lager: Kun få stk. tilbage Kun få stk. tilbage

Antal

Fitech brændstod beholder har indbygget brændstof pumpe som føder dit efi system med 58 psi. Der er også 2 tryk ure der viser indkommende fuel tryk, samt trykket til dit efi system.
En super god måde at undgå luft i systemet. Kan anvendes til både Fitech og Holley Sniper efi systmer.
Kan monteres hvor som helst i bilen. Kræver en lavtrykspumpe som supplere fuel op til beholderen.

Mere information

The FiTech Fuel Command Center Assembly is mounted in your engine compartment. It can also be mounted anywhere on the vehicle’s chassis if necessary. The conventional fuel line that originally went to your carburetor is connected to the “IN” port of the Fuel Command Center. A supplied high pressure hose is plumbed from the Command Center to the inlet port on your EFI throttle body.

How it works :

With the FiTech Go EFI System Fuel Command Center installed with your EFI system you can be sure that you have the most advanced fuel delivery system available. Here is how it works:

Your stock carbureted fuel pump (or a TBI low pressure EFI pump) feeds low pressure fuel to the FiTech Fuel Command Center’s sump tank.

A reservoir of fuel is in the sump tank at all times so the 340 L/PH pump inside is submerged in fuel. The sump tank contains a float that automatically shuts off the fuel coming into the Sump Tank when the correct fuel level is reached. At that point the stock pump is dead heading against the Fuel Command Center just like it normally would against a fuel pressure regulator.

When the engine is running the Fuel Command Center pump supplies high pressure (58 PSI) fuel to the EFI throttle body.